PAC LPA-1.2 LOC-Pro Advanced 2-CH Active Line Output Converter with Auto Turn On

Description

Thank you for stopping by!
We specialize in automotive audio aftermarket installations and OEM integration. Please add us to your list of favorite sellers and visit often. Have any questions and/or comments? Our customer service team is ready to help.
This fixed-price listing includes the
PAC
LPA-1.2
LocPRO advanced
two channel
line output converter
.
It features incredible input power capabilities, enhanced output controls, and noise isolation countermeasures. Combined with the newest vehicle systems' compatibility, these features are the gateway for your audio aspirations.
One of the best ways to add an amplifier or powered subwoofer to a factory system is with a line output converter (LOC), which reduces the factory system's high-level outputs down to the preamp-level signals your aftermarket amp can handle. PAC's
LPA-1.2
LocPro Advanced line output converter will work with just about any factory system, even amplified premium systems, to help you add an aftermarket amplifier in your vehicle.
The
LPA-1.2
active line output converter lets you add an amp without affecting the existing factory system — you just tap into the wires going to a pair of full-range speakers for the LPA-1.2's inputs. Selectable load resistance and ground isolation options ensure trouble-free OEM integration. A gain control with a clip light adjusts the signal level for optimum strength and fidelity. A low-pass filter and bass boost fine-tune the bass to sound its best. An optional wired remote is available
(not included)
, so you can control the bass level from your front seat.
What's inside?
LPA-1.2
Converter unit
Installation Instructions
Product Features
Steel housing
2-Channel Interface
On-Board Load Resistors
Auto Turn-On
Single Dial Level
20V Input Power
20V / 100W maximum @ 20kΩ
Single stereo gain controls
Wide range DC offset
Selectable ground (common, ISO or 200Ω)
Load selections: 20Ω, 60Ω, 20KΩ
Clip indicator
Turn-on mode selection (remote and DC)
9.5V Output voltage
Fixed screw-type terminal
Specifications:
Model Number:
LPA-1.2
Channels:
2 IN – 2 OUT
Operating Voltage:
9V – 16V
Max Input Level (20kH
Ω Load Setting):
20V / 100W
Auto Turn On:
DC Offset / Remote
Output Voltage MAX @ 13.8V:
9.5V RMS
Turn On Trigger (DC-Offset):
3V-7V
Load Input Impedance:
20
Ω
, 60Ω, 20kΩ
Output Impedance:
<120
Ω
Variable Gain Adjustment:
-28dB-+1dB
Signal to Noise:
>110dBA @ 6.4V Output
THD+N:
<0.01%
Input Sensitivity:
0.5V-20V
Frequency Response:
10Hz – 20KHz
Current Draw (Max):
40mA
Low Pass Filter:
No
Bass Boost:
No
Clip Indicator:
Yes
Remote Level Control:
No
Chassis Type:
Stamped Steel
Terminal Gauge:
18AWG / Screw Type
Additional Notes
We encourage all installations be done by a professional certified technician.
If you have any questions or concerns with the product please feel free to contact us at Ask Seller a Question so we can assist with any technical or customer support to resolve any issues.
Vehicles NOT made for the U.S. market are not compatible and are not guaranteed.